Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic FEP FLEX6305Z

Category:	FEP , Perfluoroethylene Propylene Copolymer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GGk88T_3MDyneonFluoroplasticFEPFLEX6305Z.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ Fluoroplastic FEP FLEX6305Z is a fully fluorinated copolymer comprising tetrafluoroethylene and hexafluoropropylene and is belonging to the product class FEP. It was developed mainly for heavy gauge wire and cable extrusion and features very high flexibility and stress cracking behavior.

Special Features

Excellent dielectric properties

High thermal stability

Service temperature range up to more than 200 °C

Outstanding chemical resistance

Wide processing window

Excellent flex life properties

Extremely low flammability (high LOI)

Smooth surface

Excellent anti-stick properties

Low coefficient of friction

Very high weathering and UV stability

Very good mechanical properties

General Information
Features	Low friction coefficient High ESCR (Stress Cracking Resistance) Copolymer Good UV resistance Good strength Good flexibility Good chemical resistance Good weather resistance Thermal stability, good No stickiness
Uses	Films Cable sheath Wire and cable applications Pipe fittings Insulating material Sheet
Forms	Particle
Processing Method	Film extrusion Wire & Cable Extrusion Extrusion Sheet extrusion molding Injection molding

Physical	Nominal Value	Unit	Test Method
Density	2.14	g/cm³	ISO 12086
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg)	5.0	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break, 23°C)	30.0	MPa	ISO 527-2
Tensile Strain (Break, 23°C)	350	%	ISO 527-2

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	255	°C	ISO 12086

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength (0.250 mm)	110	kV/mm	ASTM D149
Dielectric Constant (23°C)	2.00		ASTM D150
Dissipation Factor	6.6E-4		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	> 95	%	ASTM D2863

Additional Information	Nominal Value		Test Method
MIT Folding Endurance - double folds	300000		ASTM D2176

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	300	°C
Cylinder Zone 2 Temp.	320	°C
Cylinder Zone 3 Temp.	340	°C
Cylinder Zone 4 Temp.	370	°C
Cylinder Zone 5 Temp.	375	°C
Die Temperature	370	°C

Resin Grade	Manufacturer	Category	Trademark
TUFNYL® SGF 30 TRAFFIC GREY	SRF Ltd.	Nylon 6	TUFNYL®
AT 214	Celanese EVA Performance Polymers	LDPE	AT
Fainplast PVC GSK 6515	Fainplast Compounds S.r.l	PVC, Unspecified	Fainplast PVC
FERREX® GPP20CN46UL WHITE	Ferro Corporation	PP Homopolymer	FERREX®
LinGen FR276	Shanghai Lin Gen Rubber Materials Co., Ltd.	TPE	LinGen