Order Products : sales@su-jiao.com
Adiprene® LF 1950A
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Chemtura |
| Trademark: | Adiprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gpXoKv_Adiprene-LF-1950A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADIPRENE LF 1950A is a TDI-terminated polyester prepolymer having very low free TDI content. This prepolymer also has low viscosity, which allows it to be processed at reduced temperature for better heat stability and longer pot life. It yields a high performance, 95 Shore A hardness elastomer when cured with 4,4'-methylene-bis-(o-chloroaniline), commonly called MBCA. Features of ADIPRENE LF 1950A include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compressive Strength | ASTM D695 | ||
| 5% Strain | 3.31 | MPa | |
| 10% Strain | 5.31 | MPa | |
| 15% Strain | 7.31 | MPa | |
| 20% Strain | 10.0 | MPa | |
| 25% Strain | 13.4 | MPa |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Trouser Tear Resistance | 78.8 | N/mm | ASTM D1938 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 14.5 | MPa | |
| 200% Strain | 18.6 | MPa | |
| 300% Strain | 28.3 | MPa | |
| Tensile Strength | 50.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 460 | % | ASTM D412 |
| Tear Strength | |||
| -- 1 | 130 | kN/m | ASTM D624 |
| Split | 32 | kN/m | ASTM D470 |
| Compression Set (70°C, 22 hr) | 33 | % | ASTM D395B |
| Bayshore Resilience | 27 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 3.0 to 5.0 | min | |
| Demold Time | 15 to 25 | min |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time (100°C) | 16 | hr |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LDPE 2102TN32 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| Reslen PPH 10K | Polimarky Spolka Jawna | PP Homopolymer | Reslen |
| Absylux® SD-A | Westlake Plastics Company | ABS | Absylux® |
| BP RPP 1009 GK | Buckeye Polymers, Inc. | PP, Unspecified | BP |
| ALFATER XL® A55I 4PA0001 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
