Order Products : sales@su-jiao.com

Kaneka MUH L9401

Category:	ABS , Acrylonitrile Butadiene Styrene
Manufacturer:	Kaneka Corporation
Trademark:	Kaneka MUH
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gXkqII_Kaneka-MUH-L9401.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Kaneka MUH L9401 is an Acrylonitrile Butadiene Styrene (ABS) material. It is available in North America for injection molding.

Important attributes of Kaneka MUH L9401 are:

Good Processability

Heat Resistant

High Flow

Impact Resistant

Typical applications include:

Automotive

Electrical/Electronic Applications

General Information
Features	Good Impact Resistance Good Moldability High Flow High Heat Resistance
Uses	Automotive Applications Electrical/Electronic Applications
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.05	g/cm³	ASTM D792
Molding Shrinkage - Flow	0.50 to 0.80	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	44.0	MPa	ASTM D638
Tensile Elongation (Break)	15	%	ASTM D638
Flexural Modulus	2160	MPa	ASTM D790
Flexural Strength	66.0	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (6.40 mm)	170	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	96.0	°C	ASTM D648

Injection	Nominal Value	Unit
Drying Temperature	86.0	°C
Drying Time	3.0	hr
Rear Temperature	230 to 250	°C
Middle Temperature	230 to 250	°C
Front Temperature	230 to 250	°C
Processing (Melt) Temp	260	°C
Mold Temperature	50.0	°C

Resin Grade	Manufacturer	Category	Trademark
RapidVac™ VA-1710	Innovative Polymers, Inc.	TSU	RapidVac™
SABIC® HDPE ICP5505	Saudi Basic Industries Corporation (SABIC)	HDPE	SABIC® HDPE
Urochem 371	Chemiplastica, Inc.	Urea Formald	Urochem
ELASTOSIL® SOLAR 3210 A/B	Wacker Chemie AG	Silicone	ELASTOSIL® SOLAR
Lupol® EI5002L	LG Chem Ltd.	TPO	Lupol®