Order Products : sales@su-jiao.com
Vexel 3100
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Custom Resins Group |
| Trademark: | Vexel |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fFznfp_Vexel-3100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vexel 3100 is a general purpose polybutylene terephthalate polyester material. Vexel products have exceptional electrical properties, are quite strong, and are especially stiff, but are typically more brittle than similar nylon products. Vexel PBT is typically used for electrical components, especially with higher voltage requirements, for high heat housings and brackets, and for other functional components where the moisture absorption of nylon may be problematic. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.90 to 1.6 | % | |
| Across Flow | 1.0 to 1.7 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 51.7 | MPa | ASTM D638 |
| Flexural Modulus | 2340 | MPa | ASTM D790 |
| Flexural Strength | 82.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 154 | °C | |
| 1.8 MPa, Unannealed | 54.4 | °C | |
| Melting Temperature | 227 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 to 138 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Suggested Max Moisture | 0.040 | % | |
| Suggested Shot Size | 30 to 80 | % | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 227 to 238 | °C | |
| Middle Temperature | 232 to 243 | °C | |
| Front Temperature | 235 to 249 | °C | |
| Nozzle Temperature | 238 to 249 | °C | |
| Processing (Melt) Temp | 238 to 249 | °C | |
| Mold Temperature | 26.7 to 65.6 | °C | |
| Injection Pressure | 55.2 to 68.9 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 34.5 to 55.2 | MPa | |
| Back Pressure | 0.00 to 3.45 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PC 9005 UV | TER HELL PLASTIC GMBH | PC | TEREZ PC |
| EZ-Spray® 35 | Smooth-On, Inc | Silicone | EZ-Spray® |
| Interpol 47-5138/47-5205 20%Glass | Cook Composites and Polymers | PUR-Ester | Interpol |
| Integra™ 3342S | PolySource, LLC | PP Random Copolymer | Integra™ |
| LEXAN™ SLX2471T resin | SABIC Innovative Plastics Europe | PC | LEXAN™ |
