Order Products : sales@su-jiao.com
REVOLVE® N-266
| Category: | Plastomer , Ethylene-based Plastomer |
| Manufacturer: | Matrix Polymers |
| Trademark: | REVOLVE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YsIXwB_REVOLVE-N-266.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Revolve N-266 is a Rotomoulding based octene plastomer produced in a solution polymerisation process using a metallocene catalyst. It is designed for applications requiring excellent flow, high flexibility, outstanding toughness and excellent low temperature impact. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.902 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 30 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | > 500 | hr | |
| 100% Igepal | > 1000 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 1.30 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 7.00 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Impact - ARM (3.00 mm) | 115 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 35.0 | °C | ISO 75-2/A |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULADUR® E GF 50 SCHWARZ | A. Schulman Europe | PET | SCHULADUR® |
| TEKAMID™ TB130L | Mando Advanced Materials Co., Ltd. | Nylon 6 | TEKAMID™ |
| Evoprene™ GC 5659 | AlphaGary | SEBS | Evoprene™ GC |
| LEXAN™ FST3002 resin | SABIC Innovative Plastics Europe | PC | LEXAN™ |
| Plantic® EG501 | Plantic Technologies Limited | Biodeg Polymers | Plantic® |
