Order Products : sales@su-jiao.com
Adiprene® Duracast® C600 D
| Category: | PUR-Capro/MDI , Polyurethane (Polycaprolactone, MDI) |
| Manufacturer: | Chemtura |
| Trademark: | Adiprene® Duracast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eyPoIf_Adiprene-Duracast-C600-D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADIPRENE DURACAST C600 D is an MDI-terminated polycaprolactone prepolymer having low free MDI content. A high performance 60D elastomer with excellent physical properties is obtained when this prepolymer is chain extended with DURACURE™ C3 or C3-LF. Other advantages are improved processing characteristics and easier management of health & safety during handling. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.18 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 2(Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss - Relative vol loss | |||
| -- 3 | 100 | mm³ | |
| -- 4 | 71.0 | mm³ |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rebound Resilience - Drop Ball | |||
| -- 5 | 47 | % | |
| -- 6 | 47 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Abrasion Index | |||
| DIN 7 | 203 | ||
| DIN 8 | 144 | ||
| NBS 9 | 1600 | % | |
| NBS 10 | 1100 | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Trouser Tear Resistance | ASTM D1938 | ||
| -- 11 | 42.0 | N/mm | |
| -- 12 | 40.3 | N/mm |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain 13 | 17.9 | MPa | |
| 100% Strain 14 | 17.6 | MPa | |
| 300% Strain 15 | 31.4 | MPa | |
| 300% Strain 16 | 30.6 | MPa | |
| Tensile Strength | ASTM D412 | ||
| -- 17 | 37.9 | MPa | |
| -- 18 | 37.7 | MPa | |
| Tensile Elongation | ASTM D412 | ||
| Break 19 | 330 | % | |
| Break 20 | 300 | % | |
| Tear Strength | |||
| -- | 99.8 | kN/m | ASTM D624 |
| -- | 98.1 | kN/m | ASTM D624 |
| Split 21 | 22 | kN/m | ASTM D470 |
| Split 22 | 25 | kN/m | ASTM D470 |
| Compression Set | ASTM D395A | ||
| 70°C, 22 hr 23 | 3.0 | % | |
| 70°C, 22 hr 24 | 5.0 | % | |
| 100°C, 22 hr 25 | 5.0 | % | |
| 100°C, 22 hr 26 | 8.0 | % | |
| Bayshore Resilience | ASTM D2632 | ||
| -- 27 | 45 | % | |
| -- 28 | 45 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life (70°C) | 1400 | min | |
| Demold Time | |||
| 120°C | 20 | min | |
| 140°C | 10 | min | |
| Post Cure Time | |||
| 120°C 29 | 16 to 24 | hr | |
| 140°C 30 | 16 to 24 | hr |
| Note Message | |
|---|---|
| 1 . | Post cure 140°C (24 hrs.) |
| 2 . | Post cure 140°C (24 hrs.) |
| 3 . | Post cure 120°C (24 hrs.) |
| 4 . | Post cure 140°C (24 hrs.) |
| 5 . | Post cure 120°C (24 hrs.) |
| 6 . | Post cure 140°C (24 hrs.) |
| 7 . | Post cure 140°C (24 hrs.) |
| 8 . | Post cure 120°C (24 hrs.) |
| 9 . | Post cure 140°C (24 hrs.) |
| 10 . | Post cure 120°C (24 hrs.) |
| 11 . | Post cure 140°C (24 hrs.) |
| 12 . | Post cure 120°C (24 hrs.) |
| 13 . | Post cure 140°C (24 hrs.) |
| 14 . | Post cure 120°C (24 hrs.) |
| 15 . | Post cure 140°C (24 hrs.) |
| 16 . | Post cure 120°C (24 hrs.) |
| 17 . | Post cure 140°C (24 hrs.) |
| 18 . | Post cure 120°C (24 hrs.) |
| 19 . | Post cure 140°C (24 hrs.) |
| 20 . | Post cure 120°C (24 hrs.) |
| 21 . | Post cure 120°C (24 hrs.) |
| 22 . | Post cure 140°C (24 hrs.) |
| 23 . | Post cure 140°C (24 hrs.) |
| 24 . | Post cure 120°C (24 hrs.) |
| 25 . | Post cure 140°C (24 hrs.) |
| 26 . | Post cure 120°C (24 hrs.) |
| 27 . | Post cure 140°C (24 hrs.) |
| 28 . | Post cure 120°C (24 hrs.) |
| 29 . | Standard |
| 30 . | High Performance |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNO ABS 330 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| Veradel® 3330GF | Solvay Specialty Polymers | PESU | Veradel® |
| Ultramid® B36 01 | BASF Corporation | Nylon 6 | Ultramid® |
| Karina IVORY PVC COMPOUND 90850-35/ 1-AY-ISE-LMP | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| LNP™ THERMOCOMP™ RF009S compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
