Order Products : sales@su-jiao.com
Formolene® 2510W
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | euOK12_Formolene-2510W.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 2510W is a medium impact copolymer of polypropylene characterized by its easy mold flow, physical property balance and excellent dimensional stability. It contains a unique combination of stabilizers and pigment, which give it excellent processing and improved color. Formolene® 2510W meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact.. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 103 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 24.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 6.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1070 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 0°C, Injection Molded | 75 | J/m | |
| 23°C, Injection Molded | 110 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 85.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® 74-8126A-44 | Teknor Apex Company | PVC, Flexible | APEX® |
| DENISTAT Y 30GC 04 | Vamp Tech | Nylon 66 | DENISTAT |
| Durethan® AKV 35 H2.0 901510 | LANXESS GmbH | Nylon 66 | Durethan® |
| Elastron® G G300.A75.N | Elastron USA, Inc. | SEBS | Elastron® G |
| LNP™ LUBRICOMP™ RX05487 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
