Monprene® CP-39972 XRD4 (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene CP-39972 CLR is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-39972 CLR is a medium hardness grade that exhibits excellent sunlight resistance and is suitable for injection molding and extrusion.

General Information
Features	Low Specific Gravity Sunlight Resistant Without Fillers Low density Light stabilization Medium liquidity Medium hardness
Uses	Safety equipment Handle Kitchen utensils Washer Pipe fittings Sporting goods Stationery Consumer goods application field Toothbrush handle
Appearance	Clear/transparent
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.878	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	10	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A, 1 sec	74	ASTM D2240
Shaw A, 5 seconds	72	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
Transverse flow : 100% strain ¹	3.79	MPa	ASTM D412
Flow : 100% strain ²	5.78	MPa	ASTM D412
Transverse flow : 300% strain ³	4.12	MPa	ASTM D412
Tensile Strength ⁴			ASTM D412
Transverse flow : Fracture	11.0	MPa	ASTM D412
Flow : Fracture	6.80	MPa	ASTM D412
Tensile Elongation ⁵			ASTM D412
Transverse flow : Fracture	2000	%	ASTM D412
Flow : Fracture	210	%	ASTM D412
Tear Strength ⁶			ASTM D624
Transverse flow	59.4	kN/m	ASTM D624
Flow	48.9	kN/m	ASTM D624
Compression Set ⁷(23°C, 22 hr)	36	%	ASTM D395B

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	182 - 232	°C
Middle Temperature	188 - 238	°C
Front Temperature	193 - 243	°C
Nozzle Temperature	199 - 249	°C
Processing (Melt) Temp	199 - 249	°C
Mold Temperature	15.6 - 32.2	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	182 - 232	°C
Cylinder Zone 2 Temp.	188 - 238	°C
Cylinder Zone 3 Temp.	193 - 243	°C
Cylinder Zone 5 Temp.	199 - 249	°C
Die Temperature	199 - 249	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Note Message
1 .	Mouth die C, 510mm/min
2 .	Mouth die C, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Mouth die C, 510mm/min
6 .	C mold, 510mm/min
7 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	e2Gnaw_Monprene-CP-39972-XRD4-PRELIMINARY-DATA-.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Resiprene® 2045	Resirene, S.A. de C.V.	TPE	Resiprene®
THERMOLAST® K TF9AAB (Series: FC/HE/tl)	KRAIBURG TPE	TPE	THERMOLAST® K
ARC ARC6604	ARC Resin Corporation	Nylon 66	ARC
ENGAGE™ 8100	The Dow Chemical Company	TPO (POE)	ENGAGE™
CERTENE™ PHM-20	Muehlstein	PP Homopolymer	CERTENE™