Order Products : sales@su-jiao.com
Veradel® 3320GF
| Category: | PESU , Polyethersulfone |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Veradel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cp9gww_Veradel-3320GF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Veradel 3320GF is a 30% glass fiber reinforced polyethersulfone (PESU). After adding glass fiber to polyethersulfone, the rigidity, tensile strength, creep resistance, dimensional stability and chemical resistance of the material are greatly improved, while most other basic properties remain unchanged. The combination of structural properties and cost-effectiveness makes this resin an attractive metal substitute for many engineering applications. Natural Veradel 3320GF is a light gray opaque material that is easy to color. The brand was originally Gafone™PESU sales. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.49 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.30 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.50 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7000 | MPa | ASTM D638 |
| Tensile Strength | 120 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.8 | % | ASTM D638 |
| Flexural Modulus | 6500 | MPa | ASTM D790 |
| Flexural Strength | 170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 70 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed) | 210 | °C | ASTM D648 |
| Continuous Use Temperature 1 | 190 | °C | ASTM D794 |
| CLTE - Flow | 2.5E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Arc Resistance | 110 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) | 150 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | UL 94 | |
| Oxygen Index | 42 | % | ASTM D2863 |
| Additional Information |
|---|
| 1，按照理想工艺参数、23 + / - 2 ℃和50 ％RH的条件，对注射成型测试样本进行的测试，确认了这些属性。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 150 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 340 - 380 | °C | |
| Mold Temperature | 120 - 160 | °C | |
| Screw Speed | 20 - 50 | rpm |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Die Temperature | 300 - 320 | °C |
| Note Message | |
|---|---|
| 1 . | Expected value |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resinoid 1360 | Resinoid Engineering Corporation | Phenolic | Resinoid |
| EpoxAcast® 650 | Smooth-On, Inc | Epoxy | EpoxAcast® |
| PLUSTEK PB312J6 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| ESTOPLAST EP 4125GY81 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
| Sylvin 2900-75 Clear 8388 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
