Order Products : sales@su-jiao.com
Jam HDPE HM5010T2N
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xmWrPa_Jam-HDPE-HM5010T2N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam HDPE HM5010T2N is a High Density Polyethylene product. It is available in Africa & Middle East. Typical application: Plumbing/Piping/Potable Water. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.945 to 0.949 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 to 14 | g/10 min | ISO 1133 |
| Flow Rate Ratio 1 | 24.0 to 30.0 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hydrostatic Strength 2(80°C) | 1000 | hr | ISO 1167 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Compression Molded) | > 12 | kJ/m² | ISO 179/1eA |
| Note Message | |
|---|---|
| 1 . | 5/2.16, FRR values are statistical and calculated by dividing MFR values. |
| 2 . | 4.5 N/mm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUSTAMID 6 GC MO | Röchling Sustaplast SE & Co. KG | Nylon 6 | SUSTAMID |
| Vipel® F701-ABM-23 | AOC, L.L.C. | Polyester Alloy | Vipel® |
| Fluoroplex G 15 - GML | UNIFLON | PTFE | Fluoroplex |
| Ekalon® 20 E II S | Sattler KunststoffWerk GmbH | PC | Ekalon® |
| Polifor® 25 H-D-R NATURALE HC | SO.F.TER. SPA | PP Homopolymer | Polifor® |
