Order Products : sales@su-jiao.com

CYCOLAC™ INP338 resin

Category:	ABS , Acrylonitrile Butadiene Styrene
Manufacturer:	SABIC Innovative Plastics
Trademark:	CYCOLAC™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cQhulK_CYCOLACINP338resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SABIC INP338 is an ultra high rubber ABS impact modifier resin, and is based on polybutadiene rubber. Offers superior impact efficiency, especially at low temperatures. Reduces notch sensitivity when alloyed with engineering polymers. Disperses easily. Provides abrasion and chemical resistance to polymers. Provides toughness to PVC sheet, profile, electrical conduit and injection molded applications. Increases the impact strength of recycle PVC and other recyclates. Can be blended with polyurethanes and other polymers for improved performance and economics. Can be used to improve the impact performance of PC, polyesters, and CPVC.

Message

SABIC INP338 is an ultra high rubber ABS impact modifier resin, and is based on polybutadiene rubber. Offers superior impact efficiency, especially at low temperatures. Reduces notch sensitivity when alloyed with engineering polymers. Disperses easily. Provides abrasion and chemical resistance to polymers. Provides toughness to PVC sheet, profile, electrical conduit and injection molded applications. Increases the impact strength of recycle PVC and other recyclates. Can be blended with polyurethanes and other polymers for improved performance and economics. Can be used to improve the impact performance of PC, polyesters, and CPVC.

General Information
Features	Impact resistance, high Dispersible Good wear resistance Low temperature impact resistance Good chemical resistance Good toughness
Uses	Mixing Plastic modification
RoHS Compliance	RoHS compliance

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--	0.948	g/cm³	ASTM D792
-- ¹	0.960	g/cm³	ISO 1183
Apparent Density	0.25	g/cm³	ASTM D1895
Melt Mass-Flow Rate (MFR) (200°C/3.8 kg)	5.7	g/10 min	ASTM D1238
BD	70	%	Internal method
Mean Particle Size	180.0	µm	Internal method
Total NA Volatiles	0.30	%	Internal method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	40		ASTM D2240

Note Message
1 .	Molded

Resin Grade	Manufacturer	Category	Trademark
RTP 201 MS 2	RTP Company	Nylon 66	RTP
NEXUS PP CPP10/NB	Nexus Resin Group, LLC.	PP Impact Copolymer	NEXUS PP
Bayblend® FR3006 HF	Covestro - Polycarbonates	PC+ABS	Bayblend®
HFFR 2003PC	Teknor Apex Company	Polyolefin, Unspecified	HFFR
Hifax RTA3263EUV	LyondellBasell Industries	TPO (POE)	Hifax