Order Products : sales@su-jiao.com
Mytex® AN16L(W)-D56
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Mytex Polymers |
| Trademark: | Mytex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bdQGOH_Mytex-AN16L-W--D56.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AN16LW-D56 is a compounded talc filled elastomer modified polypropylene with good impact and excellent material flow properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 17 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 19.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 110 | % | ASTM D638 |
| Flexural Modulus - Tangent 3 | 1150 | MPa | ASTM D790 |
| Flexural Strength 4(Break) | 23.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 450 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 85.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PULSE™ A35-105 | Trinseo | PC+ABS | PULSE™ |
| ASTADUR™ B4300G6-UV | Marplex Australia Pty. Ltd. | PBT | ASTADUR™ |
| IDI SMC S52 (Glass Content 28%) | IDI Composites International | TS, Unspecified | IDI SMC |
| Softell TKG 300N 1 NAT | LyondellBasell Industries | PP Copolymer | Softell |
| Durethan® BKV 130 GIT DUS008 900116 | LANXESS Corporation | Nylon 6 | Durethan® |
