Order Products : sales@su-jiao.com
Unichem 7477G-015
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Colorite Polymers |
| Trademark: | Unichem |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bPFrQF_Unichem-7477G-015.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Unichem 7477G-015 is a flexible medical grade PVC compound designed for those medical devices that require the use of a non-phthalate plasticizer that has superior resistance to extraction by blood lipids, high fat emulsions and formulated to resist discoloration and degradation when subjected to gamma ray sterilization. Unichem 7477G-015 is designed to be extruded under similar processing conditions to compounds plasticized with DEHP. Unichem 7477G-015 is available in ethylene oxide and radiation sterilizable grades. Unichem 7477G-015 is available with and without tint as desired. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 74 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant | 7.93 | MPa | ASTM D638 |
| Tensile Strength | 16.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 400 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -31.0 | °C | ASTM D746 |
| Additional Information |
|---|
| Screw Compression Ratio: 2.5:1 to 3.2:1Typical Profile Temperature: Compound Durometer 50 to 60: 280 to 330°F Compound Durometer 60 to 70: 290 to 340°F Compound Durometer 70 to 80: 300 to 350°F Compound Durometer 80 to 90: 310 to 360°F Melt Temperature: Compound Durometer 50 to 60: 315 to 320°F Compound Durometer 60 to 70: 320 to 330°F Compound Durometer 70 to 80: 330 to 345°F Compound Durometer 80 to 90: 340 to 355°F |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 166 - 174 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sofprene T® 540200A55 | SO.F.TER. SPA | SBS | Sofprene T® |
| 4MID® 9B22130 H | 4Plas | Nylon 6 | 4MID® |
| ALTECH® ABS A 1000/627 UV | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
| Lucofin® 1400MN | Lucobit AG | EBA | Lucofin® |
| Complet® LCF5-LGF15-PP | PlastiComp, Inc. | PP Homopolymer | Complet® |
