Order Products : sales@su-jiao.com
DuraGrip® DGR 6140TR
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Advanced Polymer Alloys |
| Trademark: | DuraGrip® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bNygfg_DuraGrip-DGR-6140TR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DuraGrip® DGR6140TR is a translucent thermoplastic elastomer formulated for excellent elastic properties and enhanced adhesion to various engineered thermoplastics using insert molding, co-injection molding and co-extrusion processes. 6140TR bonds tenaciously to polycarbonate, polycarbonate alloys, ABS, ASA, acrylics, and cellulosic materials. It will also bond to various nylons and PET. DuraGrip 6140TR is hygroscopic and drying is recommended at 150F for 3 to 4 hours to ensure optimum aesthetics, properties and adhesion. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.994 | g/cm³ | ASTM D471, ISO 2781 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 13 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 43 | ASTM D2240, ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412, ISO 37 | ||
| 100% Strain | 1.23 | MPa | |
| 300% Strain | 2.50 | MPa | |
| Tensile Strength (Break) | 7.90 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 650 | % | ASTM D412, ISO 37 |
| Tear Strength 1 | 23.6 | kN/m | ASTM D624 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (190°C, 294 sec^-1) | 266 | Pa·s | ASTM D3835 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Processing (Melt) Temp | 180 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sicostirolo CR G 4142 | Ravago Group | PS (GPPS) | Sicostirolo |
| Wanthane® WHT-1180 | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
| Ultraform® N 2720 M210 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| Kepex® 3500SF | Korea Engineering Plastics Co., Ltd | PBT | Kepex® |
| Hylex® P1025L2 | Entec Polymers | PC | Hylex® |
