Order Products : sales@su-jiao.com
Maxxam™ FR MF5420-0013 FR
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Maxxam™ FR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sFXGts_Maxxam-FR-MF5420-0013-FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Maxxam™ FR flame-retardant polyolefin compounds and masterbatches meet stringent flammability performance requirements defined by industry agencies, including Underwriters Laboratories UL 94 V-2, V-0, and 5VA performance ratings. In addition, many compounds in the Maxxam FR portfolio offer elevated Relative Thermal Index (RTI) ratings. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 10.9 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 90 | % | ASTM D638 |
| Flexural Modulus | 152 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Injection Molded) | 370 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.18 mm) | 41.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm, All Color | HB | ||
| 1.50 mm, All Color | HB | ||
| 3.00 mm, All Color | HB |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Veroplas ASG33 | PlastxWorld Inc. | SAN | Veroplas |
| NuSil MED-6345 | NuSil Technology | Silicone | NuSil |
| Comai 721-2 NT | Comai Ltda | LLDPE | Comai |
| KW Plastics KWR102CA17 | KW Plastics | HDPE | KW Plastics |
| SD POLYCA™ 876-20 | Sumika Styron Polycarbonate Limited | PC | SD POLYCA™ |
