Order Products : sales@su-jiao.com
Flexalloy® 9300-60
| Category: | PVC Elastomer , Polyvinyl Chloride Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Flexalloy® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | abYhfB_Flexalloy-9300-60.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Flexalloy® 9300-60 is a Polyvinyl Chloride Elastomer (PVC Elastomer) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding. Important attributes of Flexalloy® 9300-60 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 to 2.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Break | 14.8 | MPa | |
| 100% Strain | 4.69 | MPa | |
| Tensile Elongation (Break) | 340 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compression Set (23°C) | 32 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -43.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 177 to 193 | °C | |
| Middle Temperature | 177 to 193 | °C | |
| Front Temperature | 177 to 193 | °C | |
| Mold Temperature | 23.9 to 51.7 | °C | |
| Back Pressure | 0.345 to 1.03 | MPa | |
| Screw L/D Ratio | 20.0:1.0 to 24.0:1.0 | ||
| Screw Compression Ratio | 2.0:1.0 to 3.0:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer FE-281U | Shin-Etsu Silicones of America | Fluoro Si | Shin-Etsu Elastomer |
| TPUCO® TPU-C75 | Taiwan PU Corporation | TPU-Polyester | TPUCO® |
| Tufel® II 94606 | Momentive Performance Materials Inc. | Silicone | Tufel® II |
| NuSil FS-3730 | NuSil Technology | Silicone | NuSil |
| Hanwha Total PP SH52C | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
