Order Products : sales@su-jiao.com
NuSil FS-3730
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FRKmNq_NuSil-FS-3730.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.
General Purpose: Adhesives and Sealants Comment: Available in Gray/Black/Translucent |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Tack Free Time | 30.0 | min |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Acetoxy | ||
| Operating Temperature | -50 to 200 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | White | ||
| Density | 1.40 | g/cm³ | |
| Curing Time (23°C) | 72 | hr |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 35 | ||
| Lap Shear Strength 1 | 2.62 | MPa | |
| Tensile Strength | 5.86 | MPa | |
| Tensile Elongation at Break | 430 | % | |
| Tear Strength | 10.5 | kN/m |
| Note Message | |
|---|---|
| 1 . | Primed with SP-130 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A RV250K 100 NAT | Radici Plastics | Nylon 66 | Radilon® |
| Ad-Tech Polyester NO. 31M BOAT BONDING | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| AKROMID® A3 GM 20/10 S1 natural (1217) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Hapflex™ 1056-5 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| Hipolyene 1048 X 1 | Zylog Plastalloys | TPO (POE) | Hipolyene |
