Order Products : sales@su-jiao.com

Qenos PE HD1099UV

Category:	HDPE , High Density Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	Qenos PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Zks5Qd_Qenos-PE-HD1099UV.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HD1099UV is a highly UV stabilised injection moulding grade of High Density Polyethylene with a good balance between flow and impact resistance. HD1099UV is intended for use in the production of high quality mouldings such as crates and tote boxes requiring a high level of UV stabiliser to give protection for outdoor use. Suitability for use in any application should be determined by appropriate performance testing. HD1099UV is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

Message

HD1099UV is a highly UV stabilised injection moulding grade of High Density Polyethylene with a good balance between flow and impact resistance.

HD1099UV is intended for use in the production of high quality mouldings such as crates and tote boxes requiring a high level of UV stabiliser to give protection for outdoor use. Suitability for use in any application should be determined by appropriate performance testing.

HD1099UV is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

General Information
Additive	UV Stabilizer
Features	Food Contact Acceptable Good Flow Good Impact Resistance
Uses	Crates Outdoor Applications
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.956	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	10	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness	47.0	MPa	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	30.0	MPa	ASTM D638
Flexural Modulus	1100	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (-30°C)	38	J/m	ASTM D256A

Resin Grade	Manufacturer	Category	Trademark
Toyolac® 440Y MH1	Toray Plastics (Malaysia) Sdn. Bhd.	ABS	Toyolac®
Ultramid® A3EG7 BK00564	BASF Corporation	Nylon 66	Ultramid®
Ferro PP MPP20FU16BK	Ferro Corporation	PP, Unspecified	Ferro PP
OMIKRON LL 150 NAT	TECNOPOL	PP Copolymer	OMIKRON
Moplen HP5035	LyondellBasell Industries	PP Homopolymer	Moplen