Order Products : sales@su-jiao.com
HYDEL® PEI-7
| Category: | PEI , Polyether Imide |
| Manufacturer: | Ensinger Inc. |
| Trademark: | HYDEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Z3bGM9_HYDEL-PEI-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
In recent years, industry has demanded a range of materials that not only possess strength, wear properties, heat and chemical resistance but materials that are less resistive to the build-up of a static charge. Ensinger has a family of such materials; their properties are listed on the reverse side of this sheet and described below. A static dissipative polyetherimide utilizing proprietary filler technology which renders this material electrically conductive. This technology allows for good dimensional stability after machining (unlike conventional carbon fibers), consistent electrical properties, excellent surface quality and minimal sloughing. It also possesses outstanding toughness and excellent thermal stability. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Water Absorption (Equilibrium) | 0.25 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2760 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 64.8 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 4.0 | % | ASTM D638 |
| Flexural Modulus | 2760 | MPa | ASTM D790 |
| Flexural Strength | 112 | MPa | ASTM D790 |
| Compressive Strength | 112 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | 75 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 171 | °C | |
| CLTE - Flow | 5.2E-5 | cm/cm/°C | ASTM D696 |
| Heat Deflection Temperature | 199 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+6 - 1.0E+9 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Data obtained from extruded shapes material. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD A 1500-50D | RTP Company | TPE | RTP |
| ExxonMobil™ PP7855E1 | ExxonMobil Chemical | PP Impact Copolymer | ExxonMobil™ |
| 3M™ Dyneon™ Fluoroelastomer FG 5690Q | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
| LUVOCOM® 80-8030 VP | Lehmann & Voss & Co. | Acetal (POM) Copolymer | LUVOCOM® |
| ESTOPLAST MG 7035BB11 | Ester Industries Ltd. | PBT | ESTOPLAST MG |
