Order Products : sales@su-jiao.com

NuSil CV3-2640

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	yXKqif_NuSil-CV3-2640.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 2.2 x 10^6 ohm-cm

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 2.2 x 10^6 ohm-cm

General Information
Features	Electrically Conductive Low to No Outgassing
Uses	Aerospace Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0
Tack Free Time	10.0	hr

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	Black
Density	1.01	g/cm³
Viscosity
-- ¹	10	Pa·s
-- ²	10	Pa·s
Curing Time (23°C)	1.7E+2	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	25
Tensile Strength	0.483	MPa
Tensile Elongation at Break	120	%

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Sarlink® TPE AB-2350D XRD	Teknor Apex Company	TPE	Sarlink® TPE
TOTAL Polyethylene HD 6081	TOTAL Refining & Chemicals	HDPE	TOTAL Polyethylene
Nipol® LX407BP	Zeon Corporation	Latex	Nipol®
KumhoSunny PC/ABS HAC8250	Shanghai KumhoSunny Plastics Co., Ltd.	PC+ABS	KumhoSunny PC/ABS
Lupoy® GP1000LS	LG Chem Ltd.	PC	Lupoy®