Sarlink® TPV 24550D (PRELIMINARY DATA) Datasheet,TPV,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink TPV 24550D is a high performance thermoplastic vulcanizate used in a variety of consumer and industrial applications. Sarlink TPV 24550D, available in NAT and BLK, is a high hardness, low density, UV stabilized grade designed for injection molding and extrusion.

General Information
Features	Low Specific Gravity Low density smoothness Good UV resistance Low liquidity General High hardness
Uses	Plug Washer Washer Pipe fittings Shock Absorbing Pad General Assembled glass
RoHS Compliance	RoHS compliance
Appearance	Black Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.930	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	1.5	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore D, 1 second, injection molding	52	ASTM D2240
Shore D, 5 seconds, injection molding	50	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	17.2	MPa	ASTM D412
Tensile Elongation (Break)	400	%	ASTM D412

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	204 - 243	°C
Middle Temperature	204 - 243	°C
Front Temperature	204 - 243	°C
Nozzle Temperature	204 - 243	°C
Processing (Melt) Temp	204 - 243	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 120	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	193 - 232	°C
Cylinder Zone 2 Temp.	193 - 232	°C
Cylinder Zone 3 Temp.	193 - 232	°C
Cylinder Zone 4 Temp.	193 - 232	°C
Cylinder Zone 5 Temp.	193 - 232	°C
Die Temperature	193 - 232	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPV
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YxScZ4_SarlinkTPV24550DPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
QR Resin QR-3000-GF30	QTR, Inc.	PET	QR Resin
Desmopan® DP 1485A	Covestro - PUR	TPU-Polyester	Desmopan®
Generic Alkyd - Mineral	Generic	Alkyd	Generic
HiFill® POM CO GB20	Techmer Engineered Solutions	Acetal (POM) Copolymer	HiFill®
OnForce™ LFT PP-50LGF/001 UV Black	PolyOne Corporation	PP Homopolymer	OnForce™ LFT