Order Products : sales@su-jiao.com

SCLAIR® 2908C

Category:	HDPE , High Density Polyethylene
Manufacturer:	NOVA Chemicals
Trademark:	SCLAIR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	eTsrp5_SCLAIR-2908C.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

SCLAIR® 2908C is a High Density Polyethylene material. It is available in North America for injection molding.

Important attributes of SCLAIR® 2908C are:

Antioxidant

Food Contact Acceptable

Good Toughness

High Stiffness

Impact Resistant

Typical applications include:

Containers

Food Contact Applications

General Information
Additive	Antioxidant
Features	Antioxidant Food Contact Acceptable Good Impact Resistance Good Toughness High Density High Stiffness
Uses	Crates
Agency Ratings	FDA 21 CFR 177.1520(c) 2.2
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.961	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	10	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, F50)	< 10.0	hr	ASTM D1693A

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	66		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	29.0	MPa	ASTM D638
Tensile Elongation ²(Break)	900	%	ASTM D638
Flexural Modulus	1280	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	129	°C	ASTM D1525

Note Message
1 .	50 mm/min
2 .	50 mm/min

Resin Grade	Manufacturer	Category	Trademark
RAMOFIN PPC501	Polyram Ram-On Industries	PP Copolymer	RAMOFIN
SCLAIR® 2316	NOVA Chemicals	MDPE	SCLAIR®
Argothane® TX2060	Argotec LLC	TPU, Unspecified	Argothane®
CYCOLAC™ FR15U resin	SABIC Innovative Plastics	ABS	CYCOLAC™
Hyundai EP PA66 LD630	HYUNDAI EP Co., Ltd.	Nylon 66	Hyundai EP PA66