Order Products : sales@su-jiao.com

Veradel® HC A-301

Category:	PESU , Polyethersulfone
Manufacturer:	Solvay Specialty Polymers
Trademark:	Veradel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YeKxoQ_VeradelHCA301.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Veradel A- 301 is a medium melt flow rate polyethersulfone (PESU), which is transparent, has high thermal deformation temperature, excellent toughness and dimensional stability, and is resistant to steam, boiling water and inorganic acids. Other excellent characteristics include thermal stability, creep resistance and inherent flame retardancy. Veradel A- 301 is recommended for conventional injection molding. Compliance with ITIS FDA standards, direct contact with food. Veradel A- 201 with low melt flow rate is available for extrusion and injection molding. The brand was originally named Radel®A PESU sales.

natural color: Veradel A- 301 NT

General Information
Features	Good dimensional stability Radioactive permeable High tensile strength Ethylene oxide disinfection Anti-gamma radiation Good electrical performance Good creep resistance Good adhesion Medium liquidity Good chemical resistance alkali resistance Heat resistance, high Hydrolysis resistance acid resistance Detergent resistance Thermal stability, good Good toughness Biocompatibility Compliance of Food Exposure General Disinfect with steam Medium molecular weight Medium hardness Flame retardancy
Uses	Biopharma Processing Medical Device Housings Transparent or Translucent Accessories Medical/nursing supplies Medical equipment Medical devices
Agency Ratings	FDA Food Exposure, Not Rated ISO 10993 USP Class VI
RoHS Compliance	RoHS compliance
Appearance	Transparent-Slightly Yellow
Forms	Particle
Processing Method	Composite Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.37	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (380°C/2.16 kg)	30	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.60	%	ASTM D955
Water Absorption (24 hr)	0.50	%	ASTM D570
Water Absorption - 30 days	1.9	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2690	MPa	ASTM D638
Tensile Strength	88.9	MPa	ASTM D638
Tensile Elongation (Yield)	6.5	%	ASTM D638
Flexural Modulus	2620	MPa	ASTM D790
Flexural Strength	125	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	53	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	200	°C	ASTM D648
CLTE - Flow	5.2E-5	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.7E+15	ohms·cm	ASTM D257
Dielectric Strength	15	kV/mm	ASTM D149
Dielectric Constant			ASTM D150
60 Hz	3.51		ASTM D150
1 kHz	3.50		ASTM D150
1 MHz	3.54		ASTM D150
Dissipation Factor			ASTM D150
60 Hz	1.7E-3		ASTM D150
1 kHz	2.2E-3		ASTM D150
1 MHz	5.6E-3		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Flame Rating ¹(1.5 mm)	V-0		UL 94

Injection	Nominal Value	Unit
Drying Temperature	175	°C
Drying Time	2.5	hr
Processing (Melt) Temp	345 - 385	°C
Mold Temperature	149	°C
Screw Compression Ratio	2.2:1.0

Note Message
1 .	These flammability ratings do not represent the risk of these materials or any other materials in actual fire situations.

Resin Grade	Manufacturer	Category	Trademark
Nipol® LX416	Zeon Corporation	Latex	Nipol®
BJB Epoxy TC-1604 A/B	BJB Enterprises, Inc.	Epoxy	BJB Epoxy
LEXAN™ HPH4504HEU resin	SABIC Innovative Plastics Europe	PPC	LEXAN™
LUVOCOM® 1-8520	Lehmann & Voss & Co.	Nylon 66	LUVOCOM®
Hostacom TRC 411N C11274	LyondellBasell Industries	PP, Unspecified	Hostacom