Order Products : sales@su-jiao.com
ICORENE® 1761
| Category: | mMDPE , Metallocene Medium Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XaShuD_ICORENE-1761.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 1761 is a medium density metallocene polyethylene for rotational moulding applications. ICORENE® 1761 is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow, high impact, and surface gloss. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 18.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 800 | % | ASTM D638 |
| Flexural Modulus | 700 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 190 | J/cm | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 121 | °C | ISO 306 |
| Melting Temperature | 123 | °C | ISO 11357 |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ACCUTECH™ HP0336T30L1 | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| ADPOLY MB-100 | Lotte Chemical Corporation | TPE | ADPOLY |
| Bergamid™ AB70 G40 H UF Natural | PolyOne Corporation | Nylon 66/6 | Bergamid™ |
| DINALON® A1S25 G25 | Grupo Repol | Nylon 66 | DINALON® |
| Formolene® L62608 | Formosa Plastics Corporation, U.S.A. | LLDPE | Formolene® |
