Order Products : sales@su-jiao.com
Badamid® PA12 H UV EX
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Bada AG |
| Trademark: | Badamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BmBtr4_Badamid-PA12-H-UV-EX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Plasticized, unreinforced, heat stabilized and UV protected PA12; Well suited for extrusion of pneumatic tubes and vacuum tubes of power brakes |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.03 | -- | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/1.0 kg) | 8.0 | -- | g/10 min | ISO 1133 |
| Water Absorption (Saturation, 23°C) | 0.70 | -- | % | ISO 62 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 62 | -- | ISO 2039-2 | |
| Shore Hardness (Shore D) | 70 | -- | ISO 868 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 29.0 | -- | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, 23°C) | 25 | -- | % | ISO 527-2/50 |
| Nominal Tensile Strain at Break (23°C) | > 200 | -- | % | ISO 527-2/50 |
| Flexural Modulus (23°C) | 400 | -- | MPa | ISO 178 |
| Flexural Stress (23°C, 4.00 mm) | 20.0 | -- | MPa | ISO 178 |
| Wear Resistance | 8.0 | -- | mg | ISO 9352 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | No Break | No Break | ||
| 23°C | No Break | -- | ||
| Notched Izod Impact Strength | ISO 180/1A | |||
| -30°C, Complete Break | 3.0 | -- | kJ/m² | |
| 23°C, Partial Break | 120 | -- | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 100 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 57.0 | -- | °C | ISO 75-2/A |
| Melting Temperature (DSC) 1 | 171 | -- | °C | ISO 3146 |
| CLTE - Flow (4.00 mm) | 1.7E-4 | -- | cm/cm/°C | DIN 53752 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity (1.00 mm) | 1.0E+12 | -- | ohms·cm | IEC 60093 |
| Note Message | |
|---|---|
| 1 . | 10 K/Min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 204 AR 10 TFE 5 | RTP Company | Nylon 66 | RTP |
| Shandong PP PG4301 | Shandong Dongchen Engineering Plastics Co., Ltd. | PP, Unspecified | Shandong PP |
| Cheng Yu PP238G3 | Cheng Yu Plastic Company Limited | PP, Unspecified | Cheng Yu |
| ELIX™ ABS H607AS | ELIX Polymers, S. L. | ABS | ELIX™ ABS |
| Hifax CA 1138 G | LyondellBasell Industries | PP Copolymer | Hifax |
