Order Products : sales@su-jiao.com
ESENTTIA 20H92N
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WoPN42_ESENTTIA-20H92N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: High melt flow rate Homopolymer polypropylene with high stiffness and easy mold filling, with nucleant additive. Recommended for: Injection molding of thin wall rigid containers, fast cycle time, general purpose injection molding applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 22 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 38.6 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 6.5 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 1930 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 32 | J/m | ASTM D256A |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TPUCO® TPUI-E95 | Taiwan PU Corporation | TPU-Polyester | TPUCO® |
| Duroloy® AS-41 | Unigel Plásticos | PC+ABS | Duroloy® |
| KPOL-LDPE LD K-8/918 | KPOL Chem Co. | LDPE | KPOL-LDPE |
| apilon 52bio® AB-8505 | API SpA | TPU-Polyester | apilon 52bio® |
| VALOX™ 508 resin | SABIC Innovative Plastics | PC+PBT | VALOX™ |
