Order Products : sales@su-jiao.com
Jam HD-60507/UV
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HP1MDS_JamHD60507UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
60507 is a HDPE homopolymer which is manufactured in gas phase process for injection molding grade which combines good flowability with balanced physical properties. This resin is well suited for general purpose application requiring high stiffness. Features
Applications
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 30.0 | MPa | ASTM D638 |
| Fracture | 13.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 350 | % | ASTM D638 |
| Flexural Modulus | 1500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 36 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® ET2613 | Covestro - Polycarbonates | PC | Makrolon® |
| Maxelast® F02-139A | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| RTP 282 HEC | RTP Company | Nylon 66 | RTP |
| RTP 881 TFE 18 SI 2 | RTP Company | Acetal (POM) Copolymer | RTP |
| THERMOLAST® K TC6PAN (Series: AD/PA) | KRAIBURG TPE | TPE | THERMOLAST® K |
