Order Products : sales@su-jiao.com
Auracell® CAP H
| Category: | CAP , Cellulose Acetate Propionate |
| Manufacturer: | Rotuba Extruders, Inc. |
| Trademark: | Auracell® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | W1TSKR_AuracellCAPH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Scented grade |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 66 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 154 - 160 | °C | |
| Middle Temperature | 168 - 174 | °C | |
| Front Temperature | 185 - 196 | °C | |
| Nozzle Temperature | 185 - 196 | °C | |
| Mold Temperature | 38 - 82 | °C | |
| Injection Pressure | 8.27 - 10.3 | MPa | |
| Back Pressure | 0.00 - 0.345 | MPa | |
| Vent Depth | 0.051 - 0.076 | mm |
| Injection instructions |
|---|
| Root: 290 to 300°FRear - Root: 300 to 310°FInjection Cycle Times: 8 to 12 secsBooster Cycle Time: 6 to 12 secCure Time: 40 to 70 sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® A 402H1 NATURAL | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| UNISOFT ADHESION™ AD-80A-NT-1-35 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT ADHESION™ |
| Norpex® PPE AX190 | Custom Resins Group | PPE | Norpex® |
| GELOY™ XTWE480 resin | SABIC Innovative Plastics Asia Pacific | ASA | GELOY™ |
| ULTEM™ 1010F resin | SABIC Innovative Plastics | PEI | ULTEM™ |
