Order Products : sales@su-jiao.com
S&E Automotive SE900-6
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | S&E Specialty Polymers, LLC |
| Trademark: | S&E Automotive |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VwiQ18_S-E-Automotive-SE900-6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PVC weatherable, integral colored, filled, Roof Ditch Molding Skin which meets the Ford WSK-M4D689-A5 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 70 to 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | > 11.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 240 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 3 | > 40 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Flexibility | -30 | °C | FLTM BN 102-01 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Accelerated Weathering Duration 4 | < 3.00 | SAE J2527 |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| 3 . | Method B |
| 4 . | after 2000 kj/m² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2185 UP | RTP Company | PEI | RTP |
| Durez® 4400 | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| ICORENE® N6601 | ICO Polymers EMEA, A Division of A. Schulman | ABS | ICORENE® |
| Plexiglas® V825UVA | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
| Sylvin 9077-85 Yellow 449 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
