Order Products : sales@su-jiao.com
apinat® DP2125
| Category: | Biodeg Polymers , Biodegradable Polymers |
| Manufacturer: | API SpA |
| Trademark: | apinat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VDKG3t_apinat-DP2125.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| apinat®DP2125 is a biodegradable polymer (Biodeg Polymers) product,. It is available in Europe. The main features are: environmental protection/green. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 - 1.18 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 60 | ASTM D2240 | |
| Shaw D | 40 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 2.70 - 14.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 410 - 790 | % | ASTM D638 |
| Abrasion Resistance | 37.0 - 250 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 22.0 - 107 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 110 - 130 | °C | |
| Middle Temperature | 120 - 140 | °C | |
| Front Temperature | 120 - 140 | °C | |
| Nozzle Temperature | 120 - 145 | °C | |
| Mold Temperature | 25.0 - 40.0 | °C | |
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Injection Pressure: MediumBack Pressure: Medium/Low |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 90.0 - 110 | °C | |
| Cylinder Zone 2 Temp. | 110 - 125 | °C | |
| Cylinder Zone 3 Temp. | 125 - 150 | °C | |
| Cylinder Zone 4 Temp. | 130 - 160 | °C | |
| Cylinder Zone 5 Temp. | 135 - 155 | °C |
| Extrusion instructions |
|---|
| L/D ratio: 24:1Compression Screw Ratio: 2.3:1Screw Speed: 50 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P1855 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| EMAC® SP2409 | Westlake Chemical Corporation | EMA | EMAC® |
| Polifil® PC GFPC-20 | The Plastics Group | PC | Polifil® PC |
| PENTAMID A L1 H black | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
| Braskem PE SLL218 | Braskem | LLDPE | Braskem PE |
