Order Products : sales@su-jiao.com
TECOLITE KM-350(G)
| Category: | Phenolic , Phenolic |
| Manufacturer: | KYOCERA Chemical Corporation |
| Trademark: | TECOLITE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | V8GZRd_TECOLITE-KM-350-G-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Environmental friendly and Good moldability. Suitable compounds for the parts in the state of sealing. Kyocera Chemical's Phenolic Molding Compounds "TECOLITE" are environmental friendly compound. It has good moldability and it less generate to molding die such as tarnish. It not generate ammonia gas. Therefore,it is indispensable compound to relay, fuse holder, socket, and micro-switch used especially in the state of sealing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.66 | g/cm³ | |
| Molding Shrinkage 1 | |||
| Flow | 0.20 to 0.40 | % | |
| Across Flow | 0.60 to 0.80 | % | |
| Water Absorption (Equilibrium) | < 0.30 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Strength | 98.0 to 127 | MPa | |
| Compressive Strength | 196 to 226 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 2.9 to 3.9 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | 195 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | |||
| After Boiling | 1.0E+9 to 1.0E+10 | ohms | |
| As Molded | 1.0E+10 to 1.0E+11 | ohms | |
| Dielectric Strength | > 8.0 | kV/mm | |
| Arc Resistance | 180 | sec | |
| Comparative Tracking Index | 175 | V |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E PVC GTPE-2203 | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E PVC |
| TEREZ PA 6 7850 TD | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Terblend® N 3158 | INEOS Styrolution Group GmbH | ABS+Nylon | Terblend® N |
| DAI-EL™ G-558 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| TECHNYL® C 50H2 GREY 271 N | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
