Order Products : sales@su-jiao.com
ADPOLY MB-100
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Lotte Chemical Corporation |
| Trademark: | ADPOLY |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UTL55G_ADPOLY-MB-100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MB-100 is elastomer based adhesive resin containing anhydride. This grade shows great ability as impact modifier to PA, PA66 and engineering plastics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 to 1.3 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 27.5 | MPa | ASTM D790 |
| Flexural Strength | 1.47 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 54.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAPYLENE T25GF15HB | Sahel Chimie Co. | PP, Unspecified | SAPYLENE |
| WPP PP PPHIFR | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| 3M™ Dyneon™ Fluoroplastic PFA 8502ESDZ | 3M Advanced Materials Division | PFA | 3M™ Dyneon™ Fluoroplastic |
| BMC A50 (MS) | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| POLYFLAM® RIPP 4000 E | A. Schulman Europe | PP Copolymer | POLYFLAM® |
