Order Products : sales@su-jiao.com
AEI TP-0810
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | AEI Compounds Limited |
| Trademark: | AEI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UGL8z8_AEI-TP-0810.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Easy strip, low-smoke, halogen free, flame retardant thermoplastic compound for cable sheathing. This is a flame-retardant low-smoke thermoplastic sheathing compound which has been especially developed with low tear strength and improved flexibility to facilitate easy removal from cores. The compound meets the requirements of limited toxic and corrosive fume emission, being designed to meet the general requirements of BS7655 Section 6.1 type LTS 1 to 4. TP-0810 is available in the following versions:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.52 | g/cm³ | BS 2782 620A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| Shaw A | 96 | ||
| Shaw D | 56 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 12.0 | MPa | IEC 60811-1-1 |
| Tensile Strain | |||
| Fracture | 150 | % | IEC 60811-1-1 |
| Fracture, -30°C 1 | 60 | % | IEC 60811-1-4 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength | IEC 60811-1-2 | ||
| 70°C, 168 hr, in water | -20 | % | IEC 60811-1-2 |
| 100°C, 168 hr | -7.0 | % | IEC 60811-1-2 |
| Change in Tensile Strain at Break | IEC 60811-1-2 | ||
| 70°C, 168 hr, in water | -5.0 | % | IEC 60811-1-2 |
| 100°C, 168 hr | -20 | % | IEC 60811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deformation | IEC 60811-3-1 | ||
| 80°C | 10 | % | IEC 60811-3-1 |
| 90°C | 15 | % | IEC 60811-3-1 |
| Cold shock (-30°C) | pass | IEC 60811-1-4 | |
| Cold bending (-30°C) | pass | IEC 60811-1-4 | |
| Temperature index | 260 | °C | ISO 4589-3 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 5 | N/mm | BS 6469 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 160 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 33 | % | ISO 4589-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 120 | °C | |
| Cylinder Zone 2 Temp. | 130 | °C | |
| Cylinder Zone 3 Temp. | 140 | °C | |
| Cylinder Zone 4 Temp. | 150 | °C | |
| Melt Temperature | < 170 | °C | |
| Die Temperature | 160 | °C |
| Extrusion instructions |
|---|
| An extruder with an L/D ratio (length/diameter) of 15-24 and an extruder screw with a compression ratio 1.5:1 or less are recommended. |
| Note Message | |
|---|---|
| 1 . | pass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 687 | RTP Company | ABS | RTP |
| TEKASTER™ F101M | Mando Advanced Materials Co., Ltd. | PBT | TEKASTER™ |
| Spartech Polycom SC2-1085 | Spartech Polycom | PS (GPPS) | Spartech |
| GPP™ 1020E | S&E Specialty Polymers, LLC | TPO (POE) | GPP™ |
| LUBEMID B27 GF30 NATURAL | LUBEN PLAST srl | Nylon 6 | LUBEMID |
