Order Products : sales@su-jiao.com

DIGITALWAX® DM 220

Category:	Unspecified , Unspecified
Manufacturer:	DWS Systems
Trademark:	DIGITALWAX®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Srr98G_DIGITALWAX-DM-220.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Photosensitive Resin for DigitalWax® J Series Stereolithography Systems DM220 Moulding Resin is a nano-filled ceramic resin specially developed for rubber moulding applications, including VLT, liquid silicones and vulcanized rubber at medium-high temperatures (max.180-200°C). DM220 Moulding Resin is suitable for thick and thin models. DM220 Moulding Resin can be used to make liquid silicones and rubber vulcanized at a maximum temperature of 180-200°C. Models made of DM220 resin can be removed easily from the rubber mould and they can also be broken, allowing you to carry out some difficult cuts that would be even impossible with a metal model. DM220 delivers extremely smooth surfaces and exceptionally precise and sharp details. Features Smooth surface High resolution High accuracy No further manual finishing needed

Message

Photosensitive Resin for DigitalWax® J Series Stereolithography Systems

DM220 Moulding Resin is a nano-filled ceramic resin specially developed for rubber moulding applications, including VLT, liquid silicones and vulcanized rubber at medium-high temperatures (max.180-200°C).

DM220 Moulding Resin is suitable for thick and thin models. DM220 Moulding Resin can be used to make liquid silicones and rubber vulcanized at a maximum temperature of 180-200°C. Models made of DM220 resin can be removed easily from the rubber mould and they can also be broken, allowing you to carry out some difficult cuts that would be even impossible with a metal model. DM220 delivers extremely smooth surfaces and exceptionally precise and sharp details.

Features

Smooth surface

High resolution

High accuracy

No further manual finishing needed

General Information
Filler / Reinforcement	Unspecified Nano
Features	Filled Good Mold Release Good Surface Finish
Uses	Jewelry Modeling Material Mold Making Thick-walled Parts Thin-walled Parts
Appearance	Blue Opaque
Forms	Liquid
Processing Method	3D Printing, Stereolithography

Physical	Nominal Value	Unit
Viscosity ¹(25°C)	2.00 to 3.00	Pa·s

Hardness	Nominal Value	Unit
Durometer Hardness (Shore D)	94

Mechanical	Nominal Value	Unit
Flexural Modulus	7300	MPa
Flexural Strength	102	MPa

Note Message
1 .	Liquid Resin

Resin Grade	Manufacturer	Category	Trademark
Braskem PE PLURIS 9300	Braskem	LLDPE	Braskem PE
Daelim Po1y® DHC-1	DAELIM INDUSTRIAL CO., LTD.	HDPE	Daelim Po1y®
Europrene® SOL T 161B	Versalis S.p.A.	SBS	Europrene®
Durethan® DP 2131/20 H2.0 900051	LANXESS GmbH	Nylon 6	Durethan®
IZTAVIL P-440	Mexichem Corporativo	PVC Homopolymer	IZTAVIL