Order Products : sales@su-jiao.com
Grivory® HT XE 10811 NATURAL
| Category: | Nylon 6I/6T , Polyamide 6I/6T Copolymer |
| Manufacturer: | EMS-GRIVORY |
| Trademark: | Grivory® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Sax2lX_GrivoryHTXE10811NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Grivory HT XE 10811 Natural is a 40 wt.-% glass fibre reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Grivory HT XE 10811 Natural is an injection moulding material. Acc. to ISO: PA 6T/6I Acc. to ASTM: PPA, polyphthalamide The main distinguishing feature of Grivory HT XE 10811 Natural, when compared to other polyamides, is its good performance at high temperatures. Particular properties are:
Grivory HT XE 10811 Natural is suitable for all engineering thermoplastic applications with the requirement of approvals in contact with food and/or drinking water in combination with high hydrolysis resistance and creep resistance. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.53 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Transverse flow | 0.55 | -- | % | ISO 294-4 |
| Flow | 0.10 | -- | % | ISO 294-4 |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 3.5 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 1.5 | -- | % | ISO 62 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Ball Indentation Hardness | 300 | 300 | MPa | ISO 2039-1 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 14500 | 14500 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 250 | 230 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.0 | 2.0 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 11 | 11 | kJ/m² | ISO 179/1eA |
| 23°C | 11 | 11 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 65 | 65 | kJ/m² | ISO 179/1eU |
| 23°C | 70 | 70 | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 1.8 MPa, not annealed | 280 | -- | °C | ISO 75-2/A |
| 8.0 MPa, not annealed | 160 | -- | °C | ISO 75-2/C |
| Continuous Use Temperature | ||||
| -- 1 | 140 | -- | °C | ISO 2578 |
| -- 2 | 250 | -- | °C | Internal method |
| Melting Temperature (DSC) | 325 | -- | °C | ISO 11357 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow : 23 to 55°C | 1.5E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral : 23 to 55°C | 4.5E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+11 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+13 | 1.0E+13 | ohms·cm | IEC 60093 |
| Dielectric Strength | 30 | 30 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | -- | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (0.8 mm) | HB | -- | ISO 1210 |
| Additional Information | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| ISO Type | PA6T/6I, MH, 12-140, GF40 | -- | ISO 1874 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| Hot air dryer | < 80 | °C | |
| Vacuum dryer | < 100 | °C | |
| Drying Time | |||
| Hot air dryer | 4.0 - 12 | hr | |
| Vacuum dryer | 4.0 - 12 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 330 - 340 | °C | |
| Middle Temperature | 330 - 345 | °C | |
| Front Temperature | 330 - 345 | °C | |
| Nozzle Temperature | 330 - 340 | °C | |
| Processing (Melt) Temp | 340 | °C | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 50.0 - 75.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | Short Term |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA/PP PA66/PP | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon 66+PP | Shandong PA/PP |
| Unichem 5611 | Colorite Polymers | PVC, Unspecified | Unichem |
| ColorFast® NY2 | LTL Color Compounders, Inc. | Nylon 66 | ColorFast® |
| CP PRYME® Polypropylene PPC100/2.5I-35M | Chase Plastics Services Inc. | PP Impact Copolymer | CP PRYME® Polypropylene |
| Huafon JF-P-5675 / JF-I-5118 | Huafon Group Co., Ltd. | PUR-Ester | Huafon |
