Order Products : sales@su-jiao.com

Eltex® A4009MFN1325

Category:	HDPE , High Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	RlRQks_Eltex-A4009MFN1325.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Eltex® A4009MFN1325 is a high density polyethylene. It is a homopolymer with a narrow molecular weight distribution primarily intended for the extrusion of monofilaments.

Appliations:

extrusion of monofilaments

high tenacity tapes

ceral liner films

injection molding

Blow-moulding for food packaging

Benefits and Features:

high tenacity monofilaments and tapes

very low content

superior processability & surface quality

very low MVTR (moisture vapor transmission rate)

General Information
Features	Good Processability Good Surface Finish High Tensile Strength Homopolymer Low Gel Low Moisture Vapor Transmission Narrow Molecular Weight Distribution
Uses	Blow Molding Applications Film Food Packaging Monofilaments Tape
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Blow Molding Filament Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.960	g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg	0.90	g/10 min
190°C/21.6 kg	36	g/10 min
190°C/5.0 kg	2.8	g/10 min

Thermal	Nominal Value	Unit	Test Method
Melting Temperature ¹	136	°C	ISO 11357-3

Additional Information	Nominal Value	Unit
Apparent Dynamic Viscosity ²(190°C)	1700000	mPa·s

Note Message
1 .	2nd heating
2 .	100 1/s

Resin Grade	Manufacturer	Category	Trademark
RJM SA122-85	RJM International, Inc.	PC+ABS	RJM
TEREZ PA 6 7510 GF 45	TER HELL PLASTIC GMBH	Nylon 6	TEREZ PA 6
VECTOR® 4215A	Dexco Polymers LP	SIS+SI	VECTOR®
KRALASTIC® ST-120	Nippon A&L Inc.	ABS	KRALASTIC®
Neoflex™ 8150	Zylog Plastalloys Pvt. Ltd.	TPE	Neoflex™