Order Products : sales@su-jiao.com

TOTAL Polyethylene XSene® HDPE XS 10 Orange YCF

Category:	HDPE , High Density Polyethylene
Manufacturer:	TOTAL Refining & Chemicals
Trademark:	TOTAL Polyethylene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QvzMTY_TOTAL-Polyethylene-XSene-HDPE-XS-10-Orange-YCF.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HDPE XS 10 Orange YCF is a high performance hexene-based orange compound, with a MRS 10 MPa - PE 100 classification, and primarily intended for gas pipe applications. HDPE XS 10 Orange YCF key characteristics are superior resistance to slow crack growth and rapid crack propagation ensuring safe and long-term network operation a broad bimodal molecular weight distribution offering easy processing for perfect pipes and fittings an optimised formulation of additives and finely dispersed pigments providing outstanding long-term stability in service.

Message

HDPE XS 10 Orange YCF is a high performance hexene-based orange compound, with a MRS 10 MPa - PE 100 classification, and primarily intended for gas pipe applications.
HDPE XS 10 Orange YCF key characteristics are

superior resistance to slow crack growth and rapid crack propagation ensuring safe and long-term network operation

a broad bimodal molecular weight distribution offering easy processing for perfect pipes and fittings

an optimised formulation of additives and finely dispersed pigments providing outstanding long-term stability in service.

General Information
Features	Good Melt Strength Good Processability Good Surface Finish Hexene Comonomer Med.-Wide Molecular Weight Distrib. Weldable
Uses	Fittings Piping
Agency Ratings	EC 1907/2006 (REACH)
Appearance	Orange
Forms	Pellets
Processing Method	Extrusion Injection Molding Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.950	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	0.30	g/10 min	ISO 1133
Water Content	< 300	ppm	EN 12118

Thermal	Nominal Value	Unit	Test Method
Thermal Stability (200°C)	> 20	min	ISO 11357-6

Additional Information	Nominal Value		Test Method
ISO Type	PE,E/M-ACGHL,50-T003		ISO 1872
Pigment Dispersion	< 3.00		ISO 18553

Injection	Nominal Value	Unit
Processing (Melt) Temp	200 to 260	°C

Extrusion	Nominal Value	Unit
Melt Temperature	190 to 220	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 132 HF	RTP Company	PP, Unspecified	RTP
Polytron® A40N02	Polyram Ram-On Industries	Nylon 66	Polytron®
Addisil™ 6300	Momentive Performance Materials Inc.	Silicone	Addisil™
Baoding 69M88	Baoding Bangtai Polymeric New-Materials Co.,Ltd	TPU-Polyester	Baoding
Fibremod™ GB402HP	Borealis AG	PP, Unspecified	Fibremod™