Order Products : sales@su-jiao.com
G-Lene F20S009
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Gas Authority of India Limited |
| Trademark: | G-Lene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QcACKN_G-Lene-F20S009.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
G-Lene F20S009 is a Linear Low Density Polyethylene material. It is available in Asia Pacific for film extrusion. Important attributes of G-Lene F20S009 are:
Typical applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.90 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | ASTM D1894 | ||
| vs. Itself - Dynamic, Blown Film | 0.13 | ||
| vs. Itself - Static, Blown Film | 0.16 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 42.2 | MPa | |
| TD : Break, 40 µm, Blown Film | 31.4 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 760 | % | |
| TD : Break, 40 µm, Blown Film | 860 | % | |
| Dart Drop Impact (40 µm, Blown Film) | 140 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 40 µm, Blown Film | 160 | g | |
| TD : 40 µm, Blown Film | 400 | g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PBT NH2307F | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| Mowiol® 26-88 G2 | Kuraray Co., Ltd. | PVOH | Mowiol® |
| Zytel® 70G13HS1L NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| Cellophane™ 600MSC | Innovia Films Ltd. | Cellulose, Regenerated | Cellophane™ |
| Generic Fluoro Si | Generic | Fluoro Si | Generic |
