Order Products : sales@su-jiao.com
REVOLVE® N-259
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Matrix Polymers |
| Trademark: | REVOLVE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QA2w33_REVOLVE-N-259.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Revolve n-259 is a fully formulated black rotomoulding resin suitable in applications where stiffness is a requirement. This grade presents excellent stiffness, good impact strength and toughness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.939 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 3.2 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | 80.0 | hr | |
| 100% Igepal | 250 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 21.0 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 800 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Impact - ARM (3.00 mm) | 95.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 47.0 | °C | ISO 75-2/B |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| XANTAR® C CM 406 U | Mitsubishi Engineering-Plastics Corp | PC+ABS | XANTAR® C |
| Evoprene™ G 927 | AlphaGary | SEBS | Evoprene™ G |
| LUVOCOM® 80-8886 | LEHVOSS Group | Acetal (POM) Copolymer | LUVOCOM® |
| Latamid 12 H 90FE03 | LATI S.p.A. | Nylon 12 | Latamid |
| Novalloy-A A1500 | PlastxWorld Inc. | ABS+Nylon | Novalloy-A |
