Order Products : sales@su-jiao.com
RTP 4685 TFE 15
| Category: | SPS , Syndiotactic Polystyrene |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PsvW69_RTP-4685-TFE-15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.10 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.010 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 18600 | MPa | ASTM D638 |
| Tensile Strength | 117 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 0.70 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 16500 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 165 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 43 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 210 | J/m | ASTM D4812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 271 to 327 | °C | |
| Middle Temperature | 271 to 327 | °C | |
| Front Temperature | 271 to 327 | °C | |
| Mold Temperature | 71.0 to 149 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riteflex® 830 | Celanese Corporation | TPC-ET | Riteflex® |
| WELLAMID Nylon 6000/42 GV 15 HWUVCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
| Diamond ASA S130 | Network Polymers, Inc. | ASA | Diamond ASA |
| Duron PA 6,6 10GF-IML | ProPolymers Inc. | Nylon 66 | Duron |
| HI-ZEX™ 2100JH | Prime Polymer Co., Ltd. | HDPE | HI-ZEX™ |
