Order Products : sales@su-jiao.com
Hipolyene 1046 IFL
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Zylog Plastalloys |
| Trademark: | Hipolyene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PsEK8A_Hipolyene-1046-IFL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hipolyene 1046 IFL is a Thermoplastic Polyolefin Elastomer (TPO (POE)) material. It is available in Africa & Middle East or Europe. Typical application of Hipolyene 1046 IFL: Automotive |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.978 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 16 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 180 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 150 | % | ASTM D638 |
| Flexural Modulus | 13500 | MPa | ASTM D790 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wondel® C CTA | Nanjing Julong Engineering Plastics Co., LTD | PC+PBT | Wondel® C |
| NILENE® P10 K30T | Taro Plast S.p.A. | PP Homopolymer | NILENE® |
| Adell Polyamide BH-38 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Dryflex® 938012 | ELASTO | TPE | Dryflex® |
| PLANAC BSH-130 | TOYOBO America, Inc. | PBT+PS | PLANAC |
