Order Products : sales@su-jiao.com
Kaneka MUH E7301
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Kaneka Corporation |
| Trademark: | Kaneka MUH |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PnI7yr_Kaneka-MUH-E7301.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Kaneka MUH E7301 is an acrylonitrile butadiene styrene (ABS) material,. This product is available in North America and is processed by injection molding. The main features of Kaneka MUH E7301 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 - 0.80 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 48.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 13 | % | ASTM D638 |
| Flexural Modulus | 2400 | MPa | ASTM D790 |
| Flexural Strength | 73.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.40 mm) | 98 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 110 | °C | ASTM D648 |
| Additional Information |
|---|
| Spiral Flow, Kaneka Method, 482°F, 3 mm: 24.2 in |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 3.0 | hr | |
| Rear Temperature | 240 - 260 | °C | |
| Middle Temperature | 240 - 260 | °C | |
| Front Temperature | 240 - 260 | °C | |
| Processing (Melt) Temp | 280 | °C | |
| Mold Temperature | 50.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Generic TPO | Generic | TPO | Generic |
| GERMAMID 6.6 FE 60 | Kunststoff-Kontor-Hamburg GmbH | Nylon 66 | GERMAMID |
| Jam PE 23507 | Jam Petrochemical Company | LLDPE | Jam PE |
| PENTAMID B L10 H RC schwarz | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
| Moplen EP500M | LyondellBasell Industries | PP Copolymer | Moplen |
