Order Products : sales@su-jiao.com
Multi-Flex® TPE A9702 MR
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | Multi-Flex® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | P1CVDW_Multi-Flex-TPE-A9702-MR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Multi-Flex® TPE A9702 MR is a Thermoplastic Elastomer (TPE) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. Primary characteristic: scratch resistant. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.898 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 37 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 240 | MPa | ISO 178 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 13.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 610 | % | ISO 37 |
| Tear Strength | 80 | kN/m | ISO 34-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 204 | °C | |
| Middle Temperature | 216 | °C | |
| Front Temperature | 221 | °C | |
| Nozzle Temperature | 227 | °C | |
| Processing (Melt) Temp | 227 | °C | |
| Mold Temperature | 37.8 to 48.9 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SRP2009M | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Cheng Yu FV30G20 | Cheng Yu Plastic Company Limited | Acetal (POM) Homopolymer | Cheng Yu |
| CONTINUUM™ DGDA-2490 BK GL | The Dow Chemical Company | HDPE | CONTINUUM™ |
| Eco Cool Plus MP10 | EcolBiotech Co., Ltd | PLA | Eco Cool Plus |
| HydroMed™ D7 | AdvanSource Biomaterials Corp. | PUR-Ether | HydroMed™ |
