Order Products : sales@su-jiao.com
3M™ Dyneon™ PTFE Compound TF 3311
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ PTFE Compound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VnGUgM_3M-Dyneon-PTFE-Compound-TF-3311.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.22 | g/cm³ | ASTM D4745-06 |
| Apparent Density | 0.41 | g/cm³ | ASTM D4894-07 |
| Molding Shrinkage - Flow | 2.5 | % | ASTM D4894-07 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness 1(Shore D) | 65 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Break) | 34.0 | MPa | ASTM D4745-06 |
| Tensile Elongation 3(Break) | 330 | % | ASTM D4745-06 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Compression Molding Molding Pressure | 45.0 | MPa | |
| Compression Molding Temperature | 23 to 26 | °C | |
| Sintering Temperature | < 365 | °C |
| Note Message | |
|---|---|
| 1 . | Measured on sintered moldings |
| 2 . | Measured on sintered moldings |
| 3 . | Measured on sintered moldings |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Anjaflam® 050/85S-FR | Almaak International GmbH | PC+ABS | Anjaflam® |
| DIGITALWAX® RF 080 | DWS Systems | Unspecified | DIGITALWAX® |
| Greenflex® MP 34 | Versalis S.p.A. | EVA | Greenflex® |
| KPOL-PP K-PPH 11.0 | KPOL Chem Co. | PP Homopolymer | KPOL-PP |
| Petrotene® PP A3 G20 NTLA010 PH304 | Petropol Industry and Trade of Polymers LTDA | PP, Unspecified | Petrotene® PP |
