Order Products : sales@su-jiao.com
Ferro PP TPP40AJ35BK
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Ferro Corporation |
| Trademark: | Ferro PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OvFVb9_Ferro-PP-TPP40AJ35BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
25% minimum post consumer recycle (P.C.R.) Meets/Exceeds Ford Engineering Specification WSK-M4D644-A3. Primary end use is for AC housings. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.23 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 15 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.2 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 28.0 | MPa | ISO 527-2 |
| Flexural Modulus | 3800 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 1.7 | kJ/m² | ISO 180 |
| 23°C | 2.4 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 132 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 89.0 | °C | ISO 75-2/A |
| Additional Information |
|---|
| Tensile/Izod Change, ISO 188, 1000 hours, 140°C: +3%/+8% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEOPLAST 240 FT EB | Zylog Plastalloys | TPV | NEOPLAST |
| Greenflex® MH 40 F | Versalis S.p.A. | EVA | Greenflex® |
| Paracril® X3675 | INSA | NBR | Paracril® |
| KOCETAL® CF302 | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| PSM® HL-100A1 | Wuhan Huali Environmental Technology Co., Ltd. | TP, Unspecified | PSM® |
