NYCOA Polyamide 2366

Category: Nylon+TPE , Polyamide + TPE
Manufacturer: Nycoa (Nylon Corporation of America)
Trademark: NYCOA Polyamide
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: OOVlKe_NYCOA-Polyamide-2366.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
NYCOA 2366 is an extremely flexible and transparent Nylon copolymer specifically developed for extrusion applications such as high-end fishing line, and flexible tubing.
NYCOA 2366 possesses an extremely high degree of softness, flexibility, and transparency compared to standard monofilament grade nylons.
NYCOA 2366 can be easily extruded on most equipment. This product is available in heat and light stable grades.
General Information
Additive
  • Plasticizer
Features
  • Copolymer
  • Plasticized
  • Good flexibility
  • Definition, high
  • Soft
Uses
  • monofilament
  • Pipe fittings
  • Fishery application
Appearance
  • Clear/transparent
Forms
  • Particle
Processing Method
  • Extrusion
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.08g/cm³ASTM D792
Molding Shrinkage ASTM D955
    Flow 1.2%ASTM D955
    Transverse flow 1.4%ASTM D955
Water Absorption (24 hr)1.7%ASTM D570
HardnessNominal ValueUnitTest Method
Durometer Hardness (Shore D)60ASTM D2240
MechanicalNominal ValueUnitTest Method
Tensile Strength 160.0MPaASTM D638
Tensile Elongation 2(Break)700%ASTM D638
Flexural Modulus 3250MPaASTM D790
Flexural Strength 413.8MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact (6.35 mm)860J/mASTM D256
ThermalNominal ValueUnitTest Method
Melting Temperature 203°CDSC
Additional Information
The value listed as Melting Point DSC, was tested in accordance with ASTM D789.
InjectionNominal ValueUnit
Drying Temperature 71.1°C
Drying Time 4.0 - 6.0hr
Rear Temperature 216 - 227°C
Middle Temperature 221 - 238°C
Front Temperature 232 - 249°C
Nozzle Temperature 243 - 260°C
Processing (Melt) Temp 243 - 254°C
Mold Temperature 21.1 - 48.9°C
Injection Rate Moderate-Fast
Back Pressure 0.138 - 0.345MPa
Cushion 1.59 - 6.35mm
Screw L/D Ratio 18.0:1.0
Screw Compression Ratio 3.0:1.0
Note Message
1 .50 mm/min
2 .50 mm/min
3 .50 mm/min
4 .50 mm/min
Resin Grade Manufacturer Category Trademark
SABIC® HDPE B4520 Saudi Basic Industries Corporation (SABIC) HDPE SABIC® HDPE
ExxonMobil™ HDPE HTA 001HD ExxonMobil Chemical HDPE, HMW ExxonMobil™ HDPE
Generic Nylon 66+Nylon 6I/X Generic Nylon 66+Nylon 6I/X Generic
EPO-TEK® T7109-19 Epoxy Technology Inc. Epoxy EPO-TEK®
LNP™ VERTON™ RV007ES compound SABIC Innovative Plastics Nylon 66 LNP™ VERTON™