Order Products : sales@su-jiao.com

KetaSpire® KT-810FP

Category:	PEEK , Polyetheretherketone
Manufacturer:	Solvay Specialty Polymers
Trademark:	KetaSpire®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NFN6Tv_KetaSpire-KT-810FP.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

KetaSpire KT -820 is a low flow grade unreinforced polyetheretherketone (PEEK), which is lubricating granular. KetaSpire PEEK is processed according to the highest industry standards and is characterized by different properties, including excellent wear resistance, first-class fatigue resistance, easy melt processing, high purity, excellent resistance to organic matter, acids and alkalis and other chemical substances. These characteristics make it very suitable for medical care, transportation, electronics, chemical processing and other industrial applications. KetaSpireKT -820 can be easily processed using conventional injection molding and extrusion processes. There is a natural color coarse powder grade KetaSpire KT-820P for mixing. Granular KT- 820 is sprayed with lubricant calcium stearate (0.01%) to facilitate the transportation of particles in plasticizing screw. There are low flow grades KetaSpire KT-820 NL similar to non-lubricated natural colors available.

black: KT-820 BK 95

General Information
Additive	Lubricant
Features	Good dimensional stability Electron beam disinfection Radioactive permeable Radiation disinfection Pressure cooker disinfection Good disinfection Ethylene oxide disinfection Anti-gamma radiation Impact resistance, good Good chemical resistance Fatigue resistance Heat resistance, high Steam resistance thermal disinfection ductility Disinfect with steam Flame retardancy
Uses	Films Pump parts Gear Electrical/Electronic Applications Aircraft applications Industrial application Pipe fittings Connector Seals Application in Automobile Field Oil/Gas Supplies Surgical instruments Shell Dental application field Medical/nursing supplies Medical equipment Medical devices
Agency Ratings	ISO 10993 ISO 10993-Part I
RoHS Compliance	RoHS compliance
Appearance	Natural color
Forms	Powder
Processing Method	Film extrusion Wire & Cable Extrusion Machining Extrusion blow molding Thermoforming Profile extrusion molding Compression molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.29	g/cm³	ASTM D792
Water Absorption (24 hr)	0.10	%	ASTM D570
Particle Size
Retention on 100 Mesh Sieve	0.00	%
Retention on 140 Mesh Sieve		%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3500	MPa	ASTM D638
Tensile Strength (Yield)	94.5	MPa	ASTM D638
Tensile Elongation			ASTM D638
Yield	5.2	%	ASTM D638
Fracture	25 - 50	%	ASTM D638
Flexural Modulus	3700	MPa	ASTM D790
Flexural Strength	145	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	100	J/m	ASTM D256
Unnotched Izod Impact	No Break		ASTM D4812

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load ¹(1.8 MPa, Annealed, 3.20 mm)	157	°C	ASTM D648

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (400°C, 1000 sec^-1)	510 - 650	Pa·s	ASTM D3835

Additional Information
标准包装及标签 - 根据订单数量，KetaSpire树脂可用聚乙烯桶或纸箱包装。单独包装上清楚列明品名、颜色、批号、净重。

Note Message
1 .	200°C,2 hours

Resin Grade	Manufacturer	Category	Trademark
Quadrant EPP Armor-X™ Non-Marring	Quadrant Engineering Plastic Products	TP, Unspecified	Quadrant EPP
SILVER® PP 423	Guangdong Silver Age Sci & Tech. Co., Ltd	PP, Unspecified	SILVER®
BCC Resins BC 8640E	BCC Products Inc.	TSU	BCC Resins
Bynel® 3126	DuPont Packaging & Industrial Polymers	EVA	Bynel®
Wanthane® WHT-1185F	Wanhua Chemical Group Co., Ltd.	TPU-Polyester	Wanthane®