Order Products : sales@su-jiao.com
Braskem PE LD4003
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MN4FBa_BraskemPELD4003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LD4003 is a Low Density Polyethylene produced under high pressure conditions in a tubular reactor. It offers good processability and excellent mechanical and optical properties. Additives: Slip and Antiblock Application: Films for general purposes, technical films for automatic packaging and blends with LLDPE. Process: Recommended processing conditions for film extrusion about 150 -165 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.922 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.9 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| 1% sectioning, MD : 70 µm, blown film | 145 | MPa | ASTM D882 |
| 1% sectioning, TD : 70 µm, blown film | 150 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : broken, 70 µm, blown film | 25.0 | MPa | ASTM D882 |
| TD : broken, 70 µm, blown film | 20.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : broken, 70 µm, blown film | 590 | % | ASTM D882 |
| TD : broken, 70 µm, blown film | 920 | % | ASTM D882 |
| Dart Drop Impact (70 µm, Blown Film) | 140 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 70 µm, blown film | 460 | g | ASTM D1922 |
| TD : 70 µm, blown film | 300 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | ASTM D2457 | ||
| 45 °, 70.0 µm, blown film | 79 | ASTM D2457 | |
| 60 °, 70.0 µm, blown film | 116 | ASTM D2457 | |
| Haze (70.0 µm, Blown Film) | 7.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| METLBOND® 2550 | Cytec Industries Inc. | MAH-g | METLBOND® |
| SABIC® STAMAX 60YM240 resin | SABIC Innovative Plastics | PP, Unspecified | SABIC® STAMAX |
| Sasol Polymers PE LT019 | Sasol Polymers | LDPE | Sasol Polymers PE |
| TECHLEN CM513TB | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| Hyundai EP PPC HP908 | HYUNDAI EP Co., Ltd. | PP Copolymer | Hyundai EP PPC |
