Order Products : sales@su-jiao.com
EnCom PC/PBT 1013UV
| Category: | PC+PBT , Polycarbonate + PBT |
| Manufacturer: | EnCom, Inc. |
| Trademark: | EnCom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MEvfbG_EnCom-PC-PBT-1013UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EnCom PC/PBT 1013UV is a Polycarbonate + PBT (PC+PBT) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of EnCom PC/PBT 1013UV: Good UV Resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.80 to 1.1 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1930 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 51.7 | MPa | ASTM D638 |
| Flexural Modulus | 2030 | MPa | ASTM D790 |
| Flexural Strength | 82.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 3.18 mm | 160 | J/m | |
| 23°C, 3.18 mm | 670 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 98.9 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 243 to 271 | °C | |
| Middle Temperature | 249 to 277 | °C | |
| Front Temperature | 257 to 282 | °C | |
| Nozzle Temperature | 254 to 274 | °C | |
| Processing (Melt) Temp | 260 to 279 | °C | |
| Mold Temperature | 65.6 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 75 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PP GFPP40-1 | Shandong Dongchen Engineering Plastics Co., Ltd. | PP, Unspecified | Shandong PP |
| Geon™ Vinyl Dry Blend E7755 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Dry Blend |
| ENFLEX VL-120-85A | Ravago Group | PP+EPDM | ENFLEX |
| Lucent PP TPP-220 | Lucent Polymers, Inc. | PP, Unspecified | Lucent PP |
| Magnobond 94 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
