Order Products : sales@su-jiao.com
UBE Polyethylene B028
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 7g9cBp_UBE-Polyethylene-B028.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UBE Polyethylene B028 is a Polyethylene material. It is available in North America for blow molding. Primary attribute of UBE Polyethylene B028: Rigid. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.927 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 0.40 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 57 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 19.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Apparent Bending Modulus | 200 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 102 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu RTV KE-1052A/B | Shin-Etsu Silicones of America | Silicone Rubber, RTV-2 | Shin-Etsu RTV |
| Moplen HP480S | PolyMirae | PP Homopolymer | Moplen |
| ALTECH® PP-H A 2030/156 GF30 CP | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| Formolene® 6144O | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
| Plaslube® PA11 GF30 TL20 LE | Techmer Engineered Solutions | Nylon 11 | Plaslube® |
